Cycloidal drive

src: blogs.solidworks.com

A cycloidal drive or cycloidal speed reducer is a mechanism for reducing the speed of an input shaft by a certain ratio. Cycloidal speed reducers are capable of relatively high ratios in compact sizes.

The input shaft drives an eccentric bearing that in turn drives the cycloidal disc in an eccentric, cycloidal motion. The perimeter of this disc is geared to a stationary ring gear and has a series of output shaft pins or rollers placed through the face of the disc. These output shaft pins directly drive the output shaft as the cycloidal disc rotates. The radial motion of the disc is not translated to the output shaft.

Video Cycloidal drive

Theory of operation

The input shaft is mounted eccentrically to a Rolling-element bearing (typically a cylindrical roller bearing), causing the cycloidal disc to move in a circle. The cycloidal disc will independently rotate around the bearing as it is pushed against the ring gear. This is similar to planetary gears, and the direction of rotation is opposite to that of the input shaft.

The number of pins on the ring gear is larger than the number of pins on the cycloidal disc. This causes the cycloidal disc to rotate around the bearing faster than the input shaft is moving it around, giving an overall rotation in the direction opposing the rotation of the input shaft.

The cycloidal disc has holes that are slightly larger than the output roller pins that go inside them. The output pins will move around in the holes to achieve steady rotation of the output shaft from the wobbling movement of the cycloidal disc.

The reduction rate of the cycloidal drive is obtained from the following formula, where P means the number of the ring gear pins and L is the number of lobes on the cycloidal disc.

${\displaystyle r={\frac {P-L}{L}}}$

Single stage efficiency approaches 93% and double stage approaches 86%. Single stage reductions are available commercially up to 119:1 and double stage up to 7,569:1

Maps Cycloidal drive

Disadvantages

Cycloidal drives are not typically backdrivable, although some commercially produced drives can be backdriven. However, the required torque to backdrive may vary depending on the design of the drive.

Due to the eccentric nature of the drive, if the cycloidal disk is not balanced by a second disk or a counterweight, it will generate vibration which will propagate through the driven shafts. This will cause increased wear on the exterior teeth of the cycloidal disk, as well as component bearings.

src: i.ytimg.com

See also

• Epicyclic gearing
• Cycloid gear - A gear tooth shape based on the cycloid
• Harmonic drive

src: www.etotheipiplusone.net

References

src: i.ytimg.com

External links

• Darali Cycloid Reducers
• Clock Mechanism - cycloidal drive with 15:1 reduction in motion on YouTube
• Cogulator - demonstration cycloidal drive in motion on YouTube

Source of article : Wikipedia